Blaster Cylinder Porting

The Blaster Cylinder is primitive to put it best. Casting flaws and misaligned ports are abundant. If you want to try to port your own Blaster cylinder, I'll be the first one to tell you to go for it. You can get by with a Dremel and a few tools for it. If you feel up to the task of porting your own cylinder, be sure to watch the � How to port you're own cylinder � videos on this page. Cleaning up the ports and removing all of the imperfections in your Blaster cylinder is only going to help. If you try this, I would caution you to be very careful not to enlarge the ports unless you have a pretty good idea of what you're doing. Books by Gordon Jennings and A. Graham Bell are both great reads and written in language anyone can understand. Before you try porting your own Blaster cylinder, take some time and read these books. Both links are posted here.If you decide not to try porting your own cylinder, shoot me an e-mail. I'll be glad to help.

Cylinder Porting Starting as low as $75!!

Trail Port. More Everywhere!


Photobucket Blaster porting crop1

High / Mid RPM cylinder

Photobucket Intake with wormsPhotobucket

I highly recommend our cylinder head modification to get the most out of your new cylinder.

32 B Beatrice Ave
Danielson, CT

Back to The Tech Pages
Back to Home Page
E-Mail Ken