Contents

Pricing Information

Prices do not include return shipping

Two Stroke Pricing Four Stroke Pricing
Bore and Hone Cast Cylinder: ....................$70 Bore and Hone Cast Cylinder: ....................$70
Power Valve Service: ....................$75

Includes inspection, cleaning and assembly

Valve and Seat Machining....................See Below

Cut Valve seats, 3 angle....................$25 each

Cut Valve seats for Oversize Valves:....................$45 each

Install New Valve Guides:....................$75 each. Includes Seat Machining

Swirl Polish Valves....................$10 each

Better flow and velocity.

Top End Rebuild: ....................$175

Disassemble top end, inspect gasket surfaces, plating and reeds. Hone cylinder, clean all parts including exhaust valves, set ring end gap and assemble. Add $40 if engine is still in bike. Add $50 if I have to power wash it first!

Top End Rebuild:....................$250

Complete disassembly and inspection of cylinder head, cylinder and all components. Inspect piston, rings and set valve lash. Add $40 if engine is still in bike. Add $50 if I have to power wash it first!

Crank Case Rebuild:....................$250

Inspect and clean lower engine components including transmission and crankshaft. Reassemble. Does not include parts.

Four Stroke Crankcase Rebuilds:....................$300

Includes disassembly, cleaning, inspection and assembly of entire lower end. Does not include parts.

Crankshaft Rebuilds:....................$80

Assembled with custom, state of the art jig. We don't even own a hammer. Includes certificate of concentricity. Does not include parts.

Crankshaft Rebuilds:....................$80

Assembled with custom, state of the art jig. We don't even own a hammer. Includes certificate of concentricity. Does not include parts.

Cylinder Replating Service:....................$240

Strip, replate, chamfer all ports and diamond hone.Includes power valve service.

Cylinder Replating Service:....................$230

Strip, replate, chamfer all ports and diamond hone.

Cylinder Porting:....................$180-$200

Custom porting to fit your riding style.

Cylinder Porting:....................$225

Custom porting to fit your riding style.

Head Machining:....................$65

Set squish velocity, combustion chamber and lap gasket surfaces.

Reface Cylinder Head:....................$30
Broken Case Repair:.................... Call for Quote

Most jobs are about $135

Broken Case Repair:.................... Call for Quote

Most jobs are about $135

Case Matching:....................$75

Match cases to transfer ports for maximum air flow.

Valve Adjustment:....................$65

Does not include parts.

Carburetor Inspection and Cleaning:...................$35 Carburetor Inspection and Cleaning:...................$45
Crankshaft Balancing:.......................See Below

Balance W/O rod, remove material:.....................$225

Balance W/O rod, adding material:.....................$325

Balance complete crank, assemble and true, remove metal:....................$375

Balance complete crank, assemble and true, add metal:.......................$475

Crankshaft Balancing:.......................See Below

Balance W/O rod, remove material:.....................$225

Balance W/O rod, adding material:.....................$325

Balance complete crank, assemble and true, remove metal:....................$375

Balance complete crank, assemble and true, add metal:.......................$475

Case Trenching.........$125
Remove Broken Bolt.......$25-$40 Remove Broken Bolt......$25-$40



Call

860-230-5003

32 B Beatrice Ave

Danielson, CT

06239

E-Mail Ken