quality. service. price.
Pricing Page
2 stroke pricing
| Crankshaft Services | |
|---|---|
| Most 250, 125, 100, 85, 80, 65 and 60 cc engines (Includes Rod Kit) |
$190 |
| Most engines above 250cc (Includes Rod Kit) |
$235 |
| Main bearing removal |
$15/each |
| Banshee Crankshaft Price includes Pro-X rods, top end bearings,four OEM main bearins, and static balance |
$550 |
| Single Cylinder (Labor Only) |
$110 |
| Twin Cylinder |
$310 |
| Seal Wear Surface Repair Repair groove/rough damage |
$150 |
| Crankshaft Balancing |
Call for Price |
| Crankshaft Rebuilds Assembled with custom, state of the art jig. Does not include parts. |
$110 - $150 |
| Cylinder Plating | |
| Cylinder Plating Strip, plate, hone, and assemble power valve |
$400 |
| Cylinder Plating Strip, plate, hone, bore, and assemble power valve (Does not include power valve modification) |
$490 |
| Cylinder Plating Strip, plate, weld, hone, and assemble power valve |
$500 |
| Power Valve Modification |
$90 |
| Sleeves and Re-sleeving | |
| Sleeves and Re-sleeving | click here |
| Cylinder Boring | |
| Bore and Hone Cast Cylinder Includes- bore, hone, and chamfer ports |
$90 |
| Cylinder Porting | |
| 2 Stroke Cylinder Porting |
$150-$350 |
| Power Valve Service includes parts cleaning, installation and adjustment |
$95 |
| Engine Assembly | |
| Single Cylinder Two Stroke |
$600 - $675 |
| Two Stroke Top End Rebuild Disassemble top end, inspect gasket surfaces, plating and reeds. Hone cylinder, set ring end gap and assemble. Add $160 if engine is still in bike. Add $50 if I have to power wash it first! |
$275 |
| Crank Case Rebuilds
Inspect and clean lower engine components including transmission and crankshaft. Reassemble. Does not include parts. |
$400 |
| Flywheel Lightening | |
| Flywheel Lightening |
$85 |
| cylinder Head Machining | |
| Head Machining Service Set squish velocity, combustion chamber and lap gasket surfaces. |
$65 - $90 |
| misc. machining services | |
| Case Matching
match cases to transfer ports for maximum air flow |
$100 |
| case trenching |
$125 |
| remove broken bolt |
$25 - $40 |
| other services | |
| Carburetor Inspection and Cleaning Does not include parts. |
$95 |
| Broken Case Repair Most jobs are $150 |
Call for Quote |
4 stroke pricing
| Crankshaft Services | |
|---|---|
| Most 250 cc and below (Includes Rod Kit) |
$215 |
| Most engines above 250 cc (Includes Rod Kit) |
$245 |
| Crankshaft Rebuilds Assembled with custom, state of the art jig. Does not include parts. |
$110 - $150 |
| Sleeves and Re-sleeving | |
| Sleeves and Re-sleeving | click here |
| Cylinder Boring | |
| Bore and Hone Cast Cylinder Includes- bore and hone |
$90 |
| Cylinder Head Reconditioning | |
| Machine Seats |
$30 Per Valve / $45 For Oversize Valves |
| Replace Valve Guides Includes Seat Cutting (does not include parts) |
$80 each |
| Adjust Valve Lash (does not include parts) |
$65 Per Cylinder |
| Disassemble Head, Inspect, Clean and Assemble |
$100 |
| Cylinder Head Porting |
$225-$350 |
| Reface Cylinder Head |
$60-$90 |
| Engine Assembly | |
| Single Cylinder Four Stroke |
$675 - $750 |
| Top End Rebuild Complete disassembly and inspection of cylinder head, cylinder and all components. Inspect piston, rings and set valve lash. Add $160 if engine is still in bike. Add $50 if I have to power wash it first! |
$350 |
| Crankcase Rebuilds includes disassembly, cleaning, inspection and assembly of entire lower end. does not include parts. |
$400 |
| misc. machining services | |
| Crankshaft Balancing |
Call for pricing |
| Remove Broken Bolt |
$25 - $40 |
| other services | |
| Cylinder Replating Service strip replate, and diamond hone. |
$375 |
| Broken Case Repair Most jobs are $150 |
Call for Quote |
| Carburetor Inspection and Cleaning |
$95 |
860 230 5003
© 1983-Present by Ken OConnor Racing. All rights reserved.