2 stroke pricing
| Crankshaft Services | |
|---|---|
| Most 250, 125, 100, 85, 80, 65 and 60 cc engines (Includes Rod Kit) | $215 |
| Most engines above 250cc (Includes Rod Kit) | $260 |
| Main bearing removal | $15/each |
| Banshee Crankshaft Price includes Pro-X rods, top end bearings,four OEM main bearins, and static balance | $550 |
| Single Cylinder (Labor Only) | $135 |
| Twin Cylinder | $340 |
| Seal Wear Surface Repair Repair groove/rough damage | $160 |
| Crankshaft Balancing | Call for Price |
| Crankshaft Rebuilds Assembled with custom, state of the art jig. Does not include parts. | $120 – $160 |
| Cylinder Plating | |
|---|---|
| Cylinder Plating Strip, plate, hone, and assemble power valve | $400 |
| Cylinder Plating Strip, plate, hone, bore, and assemble power valve (Does not include power valve modification) | $490 |
| Cylinder Plating Strip, plate, weld, hone, and assemble power valve | $500 |
| Power Valve Modification | $90 |
| Sleeves and Re-sleeving | |
|---|---|
| Sleeves and Re-sleeving | Click here |
| Cylinder Boring | |
|---|---|
| Bore and Hone Cast Cylinder Includes- bore, hone, and chamfer ports | $100 |
| Cylinder Porting | |
|---|---|
| 2 Stroke Cylinder Porting | $150-$350 |
| Power Valve Service includes parts cleaning, installation, and adjustment | $95 |
| Engine Assembly | |
|---|---|
| Single Cylinder Two Stroke | $600 – $675 |
| Two Stroke Top End Rebuild Disassemble top end, inspect gasket surfaces, plating and reeds. Hone cylinder, set ring end gap and assemble. Add $160 if engine is still in bike. Add $50 if I have to power wash it first! | $275 |
| Crank Case Rebuilds Inspect and clean lower engine components including transmission and crankshaft. Reassemble. Does not include parts. | $400 |
| Flywheel Lightening | |
|---|---|
| Flywheel Lightening | $85 |
| Cylinder Head Machining | |
|---|---|
| Head Machining Service Set squish velocity, combustion chamber and lap gasket surfaces. | $65 – $90 |
| Misc. Machining Services | |
|---|---|
| Case Matching match cases to transfer ports for maximum air flow | $100 |
| case trenching | $125 |
| remove broken bolt | $25 – $40 |
| Other Services | |
|---|---|
| Carburetor Inspection and Cleaning Does not include parts. | $125 |
| Broken Case Repair Most jobs are $150 | Call for Quote |
4 stroke pricing
| Crankshaft Services | |
|---|---|
| Most 250 cc and below (Includes Rod Kit) | $240 |
| Most engines above 250 cc (Includes Rod Kit) | $270 |
| Crankshaft Rebuilds Assembled with custom, state of the art jig. Does not include parts. | $120 – $160 |
| Sleeves and Re-sleeving | |
|---|---|
| Sleeves and Re-sleeving | Click here |
| Cylinder Boring | |
|---|---|
| Bore and Hone Cast Cylinder Includes- bore and hone | $100 |
| Cylinder Head Reconditioning | |
|---|---|
| Machine Seats | $30 Per Valve / $45 For Oversize Valves |
| Replace Valve Guides Includes Seat Cutting (does not include parts) | $80 each |
| Adjust Valve Lash (does not include parts) | $65 Per Cylinder |
| Disassemble Head, Inspect, Clean and Assemble | $100 |
| Cylinder Head Porting | $225-$350 |
| Reface Cylinder Head | $60-$90 |
| Engine Assembly | |
|---|---|
| Single Cylinder Four Stroke | $775 – $850 |
| Top End Rebuild Complete disassembly and inspection of cylinder head, cylinder and all components. Inspect piston, rings and set valve lash. | $400 |
| Crankcase Rebuilds includes disassembly, cleaning, inspection and assembly of entire lower end. does not include parts. | $450 |
| Misc. Machining Services | |
|---|---|
| Crankshaft Balancing | Call for pricing |
| Remove Broken Bolt | $25 – $40 |
| Other Services | |
|---|---|
| Cylinder Replating Service strip replate, and diamond hone. | $375 |
| Broken Case Repair Most jobs are $150 | Call for Quote |
| Carburetor Inspection and Cleaning | $125+ |