Description
Yamaha Blaster Carb Clamps for the Stock Carburetor
Get clamps that fit the available space on your carburetor boots. These Yamaha Blaster carb clamps feature 9 mm wide bands for the stock carburetor and compatible aftermarket clones.
Common ½-inch-wide hardware-store clamps can extend beyond the intended clamping area. These narrower bands allow better placement on the boot’s clamping surface.
Application
Use these clamps when replacing damaged, missing or unsuitable clamps on a stock-carburetor setup. Check fitment if your intake boots or carburetor have been changed.
For a 28 mm carburetor setup, see our separate 28 mm carb clamps.
Installation
Inspect the rubber boots for cracks, hardening or damage before installation. Seat the carburetor fully, position each clamp squarely on its clamping area, and tighten securely without distorting the boot. Check the intake connections for leaks after assembly.
Browse The Blaster Store for additional parts, or contact Ken OConnor Racing for fitment assistance.
