Description
Yamaha Blaster Carb Rebuild Kit for the OEM Mikuni VM26
This Bronco Yamaha Blaster carb rebuild kit provides replacement service components for the original Mikuni VM26 carburetor. Use it when servicing a carburetor with worn seals, damaged gaskets or deteriorated internal components.
Rebuilding the original carburetor starts with thorough cleaning and inspection. Replacing worn service parts can help address fuel leakage and restore proper operation when those parts are the cause of the problem.
Kit Contents
- Float bowl gasket.
- Circular gasket and assorted O-rings.
- Float needle and seat components.
- Jet needle.
- Brass jets and adjustment components.
- Small spring and retaining hardware.
230 main jet and 32.5 pilot jets included
Application
This kit is listed for the OEM Mikuni VM26 carburetor used on the Yamaha Blaster YFS200. Confirm which carburetor is installed before ordering, particularly if a previous owner replaced it.
Aftermarket VM26-style carburetors may use different internal parts. Matching the advertised carburetor diameter alone does not establish compatibility.
Rebuilding and Setup
Clean the carburetor body and fuel passages before fitting replacement components. Inspect the float, slide, carburetor body and existing hardware for wear or damage. Set the float height and initial adjustments according to the appropriate service information.
Compare replacement jet markings with your existing jetting before installation. Select jetting for your engine, exhaust, intake and riding conditions rather than assuming every included jet suits your setup.
Browse The Blaster Store for additional Yamaha Blaster fuel-system parts. For help identifying your carburetor, contact Ken OConnor Racing.
Call (860) 230-5003 with questions about fitment.
