Description
Motion Pro Yamaha Blaster Clutch Cable
Restore smooth and dependable clutch operation with the Motion Pro Yamaha Blaster clutch cable. This model-specific cable fits all 1988–2006 Yamaha YFS200 Blaster ATVs and is an excellent replacement for a cable that has become stiff, stretched, frayed, kinked, or damaged.
Motion Pro manufactures this cable with a durable, black vinyl coil-wound outer housing and an internal nylon sleeve. The liner reduces friction between the inner cable and housing, helping provide a smoother clutch lever pull and longer service life.
Two Inches Longer for Improved Cable Routing
Motion Pro lists part number 05-0119 as a +2-inch clutch cable. The additional length is helpful when your Yamaha Blaster is equipped with taller handlebars, handlebar risers, or another setup that requires more cable-routing room.
The cable can also be used on a stock-height application, provided that it is routed correctly and does not become pinched, sharply bent, or positioned near hot or moving components.
Smooth, Consistent Clutch Operation
A worn clutch cable can cause a heavy or inconsistent lever pull. It may also make clutch adjustment difficult and prevent the clutch from fully engaging or disengaging.
Replacing the cable can help correct problems such as:
- Stiff clutch lever movement
- Frayed or damaged cable strands
- Cracked outer housing
- Inconsistent clutch adjustment
- Cable binding when the handlebars are turned
- Insufficient length with taller handlebars
- Excessive resistance inside the cable housing
This cable meets or exceeds OEM quality standards and is manufactured specifically for the Yamaha Blaster application.
Product Features
- Black vinyl coil-wound outer housing
- Nylon-lined interior for smoother cable movement
- Two inches longer than the standard-length cable
- Designed to meet or exceed OEM quality
- Model-specific end fittings
- Smooth and consistent clutch operation
- Suitable for stock replacement or taller-handlebar applications
- Manufactured by Motion Pro
Yamaha Blaster Fitment
This clutch cable fits:
- 1988 Yamaha YFS200 Blaster
- 1989 Yamaha YFS200 Blaster
- 1990 Yamaha YFS200 Blaster
- 1991 Yamaha YFS200 Blaster
- 1992 Yamaha YFS200 Blaster
- 1993 Yamaha YFS200 Blaster
- 1994 Yamaha YFS200 Blaster
- 1995 Yamaha YFS200 Blaster
- 1996 Yamaha YFS200 Blaster
- 1997 Yamaha YFS200 Blaster
- 1998 Yamaha YFS200 Blaster
- 1999 Yamaha YFS200 Blaster
- 2000 Yamaha YFS200 Blaster
- 2001 Yamaha YFS200 Blaster
- 2002 Yamaha YFS200 Blaster
- 2003 Yamaha YFS200 Blaster
- 2004 Yamaha YFS200 Blaster
- 2005 Yamaha YFS200 Blaster
- 2006 Yamaha YFS200 Blaster
Specifications
| Specification | Details |
|---|---|
| Brand | Motion Pro |
| Product type | Clutch cable |
| Manufacturer part number | 05-0119 |
| Automatic Distributors number | 675119 |
| Application | Yamaha YFS200 Blaster |
| Model years | 1988–2006 |
| Length | +2 inches over standard |
| Housing | Black vinyl coil-wound housing |
| Inner lining | Nylon sleeve |
| Position | Clutch |
| Quantity | One cable |
Installation Recommendations
Compare the new cable with the original before installation. Route it along the factory path when possible, allowing enough room for the handlebars to turn fully in both directions.
After installation:
- Adjust clutch lever free play to the proper specification.
- Turn the handlebars completely left and right.
- Confirm that the cable does not tighten or pull the clutch.
- Keep the cable away from the exhaust, steering stops, sharp edges, and moving components.
- Operate the clutch several times and verify smooth engagement before riding.
Do not force the cable into tight bends. A sharp bend increases friction and can shorten cable life.
Why Buy From The Blaster Store?
The Blaster Store specializes in parts for the Yamaha YFS200. We understand how the components fit, how they should be installed, and which parts work together. If you need additional clutch components, levers, engine hardware, or replacement parts, we can help you choose the correct setup for your Blaster.
Frequently Asked Questions
What years does this Yamaha Blaster clutch cable fit?
It fits all Yamaha YFS200 Blaster models produced from 1988 through 2006.
Is Motion Pro 05-0119 a standard-length cable?
No. Motion Pro identifies part number 05-0119 as being two inches longer than the standard clutch cable.
Why would I need a +2-inch clutch cable?
The additional length can provide the extra routing room needed for taller handlebars, handlebar risers, or modified control positioning.
Can it be used with stock Yamaha Blaster handlebars?
It can generally be used if the additional cable length is routed properly. Make sure the cable does not form tight bends, contact hot components, or interfere with steering.
Will a new cable make the clutch lever easier to pull?
It may improve lever action when the original cable is rusty, frayed, kinked, contaminated, or binding internally. A heavy lever can also be caused by the clutch springs, lever assembly, actuator mechanism, or incorrect routing.
Does this cable eliminate the TORS system?
No. This is a clutch cable, not a throttle cable or TORS-elimination cable.
Is the clutch lever included?
No. This listing includes one Motion Pro clutch cable. The clutch lever and perch are sold separately.
WooCommerce Product Data
Brand: Motion Pro
Manufacturer part number: 05-0119
Distributor part number: 675119
Condition: New
Vehicle type: ATV
Make: Yamaha
Model: YFS200 Blaster
Years: 1988–2006
Product type: Clutch cable
Color: Black
Length: +2 inches
Quantity: One
Reviews
There are no reviews yet.